
The shampoo bottle falls off the tub rim again. You could hang a shelf right above it, but the mounting pads might land across a grout line. Start by finding a spot you can reach with wet hands and checking what can actually hold the shelf there.
1. Mock up the spot with your everyday bottles
A Chinese rental-bathroom makeover shows a useful idea at the sink: moving skincare off the counter onto a small shelf near where it gets used. Apply that idea to the shower with a cardboard mockup. Group the shampoo, conditioner, and body wash you use regularly. Mark how wide the shelf needs to be, include room above the pump, and check that you can turn to reach the controls without bumping the shelf.

2. Adhesive caddy for a flat, compatible wall

Measure the usable wall width and height around the mount points. Check the exact kit’s approved surfaces and place each pad on a flat area clear of grout. Follow the package’s cleaning, pressing and waiting instructions for an inside-shower installation. Weigh all full bottles together and compare that weight with the limit printed on the package you receive.
3. Over-door caddy for a compatible shower door

Check the top edge, including any trim, against the hanger specifications. Measure the narrowest gap above that spot as the door moves. Also check how far the loaded shelves project into the shower. After fitting the hanger per the maker’s directions, swing the empty door gently through its full travel before putting anything in the caddy. Stop if the hook touches the frame or the door binds.
If the wall and door both fail the fit checks, a tension pole is another option for a clear corner. Measure from the actual tub ledge or shower floor to the ceiling at that spot. Compare the result with the pole’s supported range and check that both contact surfaces are approved for that model.
For adhesive, record the flat mounting area and the weight of your full bottles. For a door hook, record the top edge thickness, overhead gap, and room for the shelves to swing.
Recommended products

Simplehuman Over Door Adjustable Shower Caddy (BT1101)
For a shower door that can still close with a hanger fitted. The unit is approximately 13.3 in. wide × 5.9 in. deep × 33.1 in. high. Check the manufacturer’s diagram for the hanger fit and leave room for the loaded shelves to swing.

Command Shower Caddy (BATH11-ES)
For a compatible wall surface. This frosted caddy comes with water-resistant strips. Check the mounting template, the load limit printed on your package and the waiting instructions before loading it.
View the frosted caddy on Amazon · Find BATH11-ES and its product link at 3M
Case reference (in Chinese): Douyin rental bathroom sink makeover.
The product comparisons use published dimensions and installation information. The shopping links are standard retail links.